Transformer and Switchgear Bushings
Multicast is an industry leader in variety and design
of standard and specialty
bushings for transformers and switchgear. Some
product data are listed below:
-
Standard transformer and switchgear bushings, from 600 Volt
to 35 kV (170 kV BIL) can be made for any tank hole and bolt alignment.
We also make a triangular flange bushing that does not require a clamp.
All bushings can be made complete with a gasket and clamp in order
to make installation that much easier.
-
Bushings can be cast as multiple bar, single stud, dead end,
spade end, threaded end, or window type. Multicast currently makes
standard transformer bushings for up to 10,000 amperes.
-
Types of Bushings :
-
Hole in Line
-
NEMA / Spade
-
Stud
-
Bar, (or multiple bars)
-
Cavity
-
Window
-
Flange Shapes :
-
Conductors :
-
Available Options :
-
Gaskets
-
Clamps
-
Tapped or Threaded Studs
Ground Shield
Return to Multicast
Homepage
Net Editor - multicast@accesscomm.ca
Contact Us